This is the text version of DirtRider.Net
Click Here for the Full Version

• Bike Tuning
• 97 yz250 cylinder change
• Yamaha Raptor 350 Backfire
• Skid plate or Glide plate
• suzuki rm80 rm 80 rebuild. PLEASE READ!
• 82 yz250 missing on the top end
• XR650 Crankcase oil leak?
• Front and rear sprocket
• Throttle Cable setting Question ( Jetting )
• bike guru WANTED Yamaha yz125
• Fuel to oil Ratio
• Cam chain tension
• Bent handlebars
• Weird Jetting Issue - Air Filter?
• anyone ever use an easy pull clutch
• bike cuts off when put into first gear
• i have to rev engine up to put into 1st gear
• cr 125 fouling plugs
• GOVERNOR question plz help
• Bike misses at when powerband kicks in.
• Minimoto Track CRF80
• Gear puller to get main drive gear off?
• re-painting black rims
• Looking for sister part...
• 2004 kx 125 wont kick
• Coolant Leak
• The old clutch clunk but other issue
• Missing Spokes
• ktm problems
• Part List / Site info
• proper way to warm up cr 125
• is it possible
• Re-chrome cylinder
• yz 85 bogging in low gears but better in high gears would appreciate help
• C-Clips took out piston and cylinder, need advice.
• How to tackle a cracked frame?
• 03 CR compression
• headstem bearing? 01 RM 125
• Foreward motion
• servicing...
• wont run with choke in
• RM250 Knocking
• need help
• powervalve adjustment
• Wiring help.....
• Oil in Radiator but not crankcase
• Exhaust couplings
• Cleaning and lubing chain
• 06 KX450f tranny???
• Reeds don't fit?
• Problem or normal??
• RM 125 Parts...
• brake pads
• Really new and dont have a manual....yet
• Sticky Clutch Problem
• Need help!!!!!!!!!!!
• Fouled plug
• 1976 kawski kh100
• what to do with my bike?
• 95 Rm 25o Question
• factory plating
• Whats up - Plug fouling ??
• Help needed please.
• Kx125 transmission help
• Need bore and/or hone on my iron sleeved 95 YZ125
• bike overheating help!!!!
• Bike all of a sudden has no bottom end, even in first gear!
• Can this cylinder be saved? With pics...
• Stripped skid plate bolt-what now?
• need help bringing back life into 93 rm 250
• "O" ring or non "O" ring chain?
• help with clutch
• clutch
• stress from a 12 tooth?
• Rm 125 Is Messed Up!
• tires
• spark?
• Where to find jet kits for an '01 CR125?
• Kx125 overheating?
• I'm Stumped with my YZ
• does anyone know
• YZ thats likes to foul all my plugs
• XR650L losing compression?
• guess what, ANOTHER problem with yz
• kx 85
• yz250 93 model
• tm jetting
• Just Wondering
• Best cheap motocross chain
• newbie needs help with a rm250
• Difference between NGK plugs
• Forward Motion Closed for the Summer
• Why repack?
• best silencer
• my yz kinda cuts in and out
• Leaking Gas
• Bike won't start wehn warm, only when cold.
• HELP ASAP!! jetting questions for my 04 yz 250
• tm 125 fouling plugs
• CR125 not getting fire
• Question for a friend...
• RM 125 WIERD prob!! ..help!
• FMF Headers for ktm 525exc repair where ?
• Need Help Deciding on Clutch Basket
• loose kickstarter
• flywheel rotation?
• what gaskets and seals do i need to put my 2004 yz 250 top end back together?
• Maxima causes excessive smoke???
• How to get the axle out for changing a tire?
• Confounding problem: 93 CR250
• anyone ever clean an air filter with gas?
• RT180 Forks
• 1993 Yz125 Advice Needed
• No toil filer oil?
• Chinese nightmare electrical problems.
• Removing those unremovable stickers?
• 91 RM250 throttle stuck????
• INterchangeable Years?
• 04' 250x Runs hot, hard to start, etc.
• Head Gasket(s) Question?
• Yamha DT400 Tuning Issues
• 01 RM 125 Piston blow bye
• Bogger
• rejetting help???
• hey everybody
• 2000 YZ250 Drive axle oil seal
• Fumbling fingers can't get the throttle cable attached to the carb...
• Can't get kick start bracket off the shaft, HELP!
• CR125R Not Running gr8, HELP Please!!!
• Help With RM...
• Rear Hub
• Discolored Gas Tanks
• help
• Signs and Symptoms of a top end!!!!
• Throttle cover or rubber boot replacement
• Top End Help?
• Bike won't start...just replaced throttle cable
• Compression, Fuel, Spark - NO START!
• engine removal advice
• problem help
• Need help with 2004 TTR 225
• major Oil trouble
• Bike runs like crap.
• Oil Escaping
• New Clutch
• YZ125 Smoking pretty bad
• Any benefits to a soft terrain tire?
• yz tank
• Engine sprocket leaking oil?????
• YZ 144 gearing setup
• Differences between 1999 and 2000 YZ250 carbs...
• rickyj 98cr250 Blues?
• Grip glue
• kawasaki crankshaft jig
• i have a question
• How to make a dirtbike quiet???
• Absolutly Stumped & Clueless....Need Help (long)
• Yamaha RT 180? What's it for?
• Cant kick start bike. Help the new guy
• front break stuck shut?
• throttle cable
• Need instruction on break-in process.
• gear oil in stator housing!?
• power valve Q's
• cr125 stall problems
• Cracked Crankcase - Internal chunk missing
• Newbie needs help... How to check oil level on 1999 YX125?
• tire size
• what year/ size is it?
• chain and sprocket ?
• Bike Wont Start?
• MY CR250 JUST DIED, NOT CEASED!!! help.
• 96 Rm 250 ?
• Water in cylinder
• Air Leak -crank seal repair
• Blown Hub, Easy Fix?
• Good Place for a cheap stock exhaust
• Please help!!!!
• 1987 honda xl250 wont start
• Stator
• Best Online OEM Part Source
• Broken Spokes
• yz125
• Does'nt growl with the clutch dissenguaged
• need helpwith rt100
• '01 YZ 125 clutch cover will not come off
• 18 inch rear the answer?
• Leaky Power Valve
• KX Cylinder Scratched
• Can't crank 2005 TTR125
• Oil Injection Nozzle Glue?
• oil & water mixture + studdering power band
• Repair Videos
• overbore?
• Plastic for 89 YZ250
• klx110 valve adjustment
• These Worth it?
• repalcment thouttle
• Is a Mid 90's CR125 worth $400?
• replacing front brake piston dust/oil seals

This is the text version of DirtRider.Net
Click Here for the Full Version