Looking for info conerting my SX to MXC. (transmission)Need to know part numbers,price and advise doing this conversion.Fellow members,please help. Thanks in advance !;)
You might want to check out the board on www.holeshotforum.com I copied this from there a while ago. I was at Hungry Valley couple weeks ago and one of the guys (travis D37) did it himself in about 4 hours. Said it wasn’t that difficult. I’m thinking pretty hard about it myself.
Here you go: several guys have been asking for the parts list. here is what you will need. w/ part number, the part, and price. remember, this is for the '00 model, but it should work for '01 and '02 models too. someone correct me if i'm wrong about that.
580.38.023.200 (2) pressure spring 1.78 (for both)
503.34.018.100 (1) shifting roller 2.07
590.34.019.000 (1) shift rail 9.69
590.34.001.000 (1) shift fork 43.72
590.33.005.034 (1) idler gear 5th 65.27
565.33.099.000 (2) needle bearing 18.88 (for both)
590.33.031.000 (1) stop disk .96
0471 250120 (2) circlip .60 (for both)
590.33.006.035 (1) idling gear 6th 67.62
590.33.030.000 (1) stop disk .96
590.30.099.000 (1) gasket set 114.85
590.36.013.050 (1) rivet link 3.64
330.04
tax $24.75
total $354.79
you'll need to take out the following:
590.33.032.000 (2) spacer bushing
590.33.003.038 (1) sliding gear 3/4.G 22/19-T"32"
also take pin out of shift drum
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.