01 WP USD 43 fork disassembly procedures?


KTM400EXC#232

Member
Mar 19, 2001
22
0
In need of specs and procedures in order to change my fork seals, 600 miles and leaking seals already.
Any help greatly appreciated.
Thanks in advance.

This seems to be a common fault?

Tom

--------------------------------------------------------------------------------
 

dstktmusa

Member
Jan 5, 2001
179
0
If you have never done anything like this before, I would recommend a WP service manual. There are some very important steps that you must take when reassembling i.e oil levels, bleeding the rebound, and compression and rebound nuts.

------------------
 

KTM400EXC#232

Member
Mar 19, 2001
22
0
WP Service manual, sounds like what I need, do you have part numbers and would you expect I'd be able to get these thru KTM dealers?

All I need is to be able to replace the fork seals. I can change the fluid, spring and spring preload.

Just the next step.


Thanks in advance


[This message has been edited by KTM400EXC#232 (edited 04-09-2001).]
 


Top Bottom