lethaface

Member
May 8, 2006
7
0
Hi all just wanting a little info on the 99-2002 carb size..I am putting together a pair of these carbs for a banshee..Also what type of carb is it? It looks like a mikuni TM carb but i can't exactly tell from the pictures..I'm running 34pj's off a CR125 now but need to go a little bigger for my new cheeta cub motor..Thanks in advance

Letha
 

CR Swade

~SPONSOR~
Jan 18, 2001
1,764
5
99 and 2000 were Keihin 38mm carbs. The 01 and 02 got the Mikuni TMX carb, which were a mess on those bikes
 

CR Swade

~SPONSOR~
Jan 18, 2001
1,764
5
The 99-00 had the same carb as my 97 CR250...I'm wanting to say it was a PJ, but that I can't remember. I still have the Mikuni off of my 02, the 01 I made work w/ the existing Mikuni and lots of jetting/slide fixes. The 02, I fitted w/ a Keihin...big improvement

FWIW, we put the Mikuni from my 02 CR on a RM250 and it ran awesome...go figure
 

darringer

LIFETIME SPONSOR
Dec 2, 2001
1,029
0
'99 and '00 are 38mm PWK with no powerjet. I believe the '97 and '98 are also 38mm PWKs but have the powerjet solenoid.
 

CR Swade

~SPONSOR~
Jan 18, 2001
1,764
5
darringer said:
'99 and '00 are 38mm PWK with no powerjet. I believe the '97 and '98 are also 38mm PWKs but have the powerjet solenoid.

Yeah, that is exactly right...its been so long ago. I forgot all about the powerjet carb on my 97. That was about the only CR I didn't own long enough to know it inside and out...sure ran awesome though. I think it ran better than any CR I have owned except for the Eric Gorr 265 monster bike I had for awhile
 

Top Bottom