HOW TO: Clutch cable replacement

[JulianC]

I need to replace my clutch cable i now what route to follow how to adjust it and conect it to the lever but i have no idea with the end that acutually goes into where the clutch is. Could you give me a step my step of how to replace the cable from begingin to end thanx it would be muchly apreciated

 

[Peer Lovell]

Just look at the old one and follow the same route.
You can tie a string to one end and the other to your new cable, so it follow the same route as you remove the old one.

 

[njkx]

I'm not sure on a KTM but can't you tell which end goes where by looking at the old one. on my kx there is a little rubber sleeve on the end that goes on the clutch. just take the old one off and put the new one on the same way.

 

[Someone]

On my YZ 250 the end that goes to the clutch is much smaller than the end that goes in the clutch lever on the bars.

 

[sick 96 250]

the end that goes into your clutch lever should have an adjustment area right next to it on the cable itself which you can adjust for tension. Other than that you should be able to tell just by looking at the old cable.

 

[JulianC]

sorry guys i wrote it wrong i know which end is which but i dont know how to conect the end in clutch