Carolinadirt

Member
May 30, 2016
1
0
Hi everyone! I wondering if you all can help out with this problem on a Honda XR100R. I replaced the plug, plug wires, the coil,and the the CDI box. Still no spark! What else is possibly wrong? Is there some trick to starting it that I don't know about?
 

Okiewan

Admin
Dec 31, 1969
29,555
2,237
Texas
Good ground?
Did you replace the stator?

Your output from the stator to cdi should be at least 60v AC, if it is not, then your stator needs rewinding If you have good power then check that trigger is working, using a multimeter on the lowest voltage scale connect to 2 wires from exciter when you kick the bike over the needle should flicker, if not it is faulty, If its ok then get your cdi and coil tested, these should be done under load, in other words on a tester not with ohm meter as some people do and get incorrect readings,apart from that there is only the plug cap and the plug.
 

Top Bottom