I know someone has had this problem out there and any assisatance would be great. Okay here goes, pw50 which has been running fine starting to quickly loose power and stalled and wouldn't restart. Since that day , a few weks ago, i have changed the gas (which had a little water in it), bought new plug (good solid blue spark), cleaned the carb and jetting area ( a little bit of dirt), checked the carb settings (1 3/8 turns out), air filter cleaned and oiled, compression tests read about 77psi (wow!), but this bike will not start.......it turns over and wants to sputter (occasionally runs rough for 3-4 seconds) but won't begin to idle, and won't react to a quick throttle twist. Plug is getting gas and so is carb, could this be a electrical issue and if so please offer testing procedure, or any other help, thanx, dean. :bang: