UFO Tail Light Wiring Question

Sthutch

Member
Jun 30, 2009
17
0
For Christmas, my wife got me a new UFO rear fender with a tail light. My question is, how do I wire it? The UFO tail light has 3 wires and my '01 KDX200 has two. Which wires go where?

Thanks for any assistance.
 

reepicheep

Member
Apr 3, 2009
670
2
The tail light has hookups for the dual filiments in the bulb... so in theory you could have a brake light and a tail light.

Either will work, I think one is brighter then the other. The combination that has the lowest resistance on your ohm meter will be the brightest one.
 

Toonces

Member
Mar 28, 2018
3
2
P3260009.JPG
This is the UFO fender I installed on my 1991 KDX200.


The bulb that came with it has no markings but appears to be an 1157 bay15d.
P3250002.JPG


These are the three wires coming from the UFO tail light assembly. The white/green one is the brake light. The brown one is the ground and the white one is the running light. My bike has two black/yellow ground wires connected to the male connector. A brown wire along with a red wire carry the voltage to the other male connector. I left the white/green one unconnected.
P3250004.JPG
P3260008.JPG

I like to crimp AND solder my connectors.
P3260005.JPG
 
Top Bottom