A couple of things about the various bends. The different brands have a different idea of what actual is a CR high bend. To confuse us a little further, some give their specs in inch measurements, and others give mm. To convert, multiply the inch by 25.4 to get mm.
Basically, here's what I liked- anything past 60 mm sweep is too much pullback. 90 mm rise was about right on a KDX for me at around 6-0". (Stock bars are about 75mm rise, and 62 pullback.)
Hope this helps
------------------
-01 RM250 (mine) & 01 RM125 (kid's)
-Senior A Enduro and Hare Scramble Rider.
"Yep, that 14 yr old A Class rider is MY kid; He learned to ride from ME!!"
both my brother and i are running o'neal pro-lock bars with a high-cr bend they are sweet on the KDX and they are still a 7/8" bars so you can use your factory mounts, both our bikes have hit the ground and we havent bent either of them yet, so we think they were a bargain for the 50 bucks we paid.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.