JEWFASA

Member
Jul 7, 2016
4
0
Hello there I have a 1982 Yamaha IT465 that I just recently picked up. The guy I got it from told me it needed a carb cleaning, so when I got it back to the house I took the card out and gave it that good cleaning. What I forgot to do was count the turns on both my idle and air screw now the bike is flooding out. What I would like to know is what the stock settings for these bikes?
 

Okiewan

Admin
Dec 31, 1969
29,555
2,237
Texas
Are the floats moving freely?
Did you remove and clean the jets?
Post up any markings / numbers, etc. that are on the carb. Photos of the carb as well.
 

JEWFASA

Member
Jul 7, 2016
4
0
They move up and down freely, but I'm afraid a small piece of dirt is stuck in the valve. My bike is in my buddies garage. Or else I could give you a close up.
 

Welcome to DRN

No trolls, no cliques, no spam & newb friendly. Do it.

Top Bottom