This bike is driving me insane with the splooge coming out of the exhaust. I am at 6000ft above sea level, so jetting needs to be pretty lean, but how lean can I go. I've changed to a leaner needle @ (2nd Clip), 42 Pilot and a 168 Main. Air screw out at 1.5 turns. as you can see, everything is leaned out, bike runs great but at the end of every ride (Unless it's cold), I have a thick line of black splooge running down my exhaust and dripping onto the swingarm. I've even replaced the oil seal in case it was trans oil getting into the cylinder.
Have I reached the point where I must accept the above, or at my altitude, can I go even leaner. I mainly do woods riding with a bit of MX every now and then. Help, help help........
Have I reached the point where I must accept the above, or at my altitude, can I go even leaner. I mainly do woods riding with a bit of MX every now and then. Help, help help........