I cannot get my rear brakes to work right on my kx125. I got new pads installed them, bleed the brakes, and the pads still do not compress against the rotor tight enough and when they are semi compressed they don’t return so the brakes are always kinda engaged. I didn’t do anything special to...
I have a 2001 kx125 this is running what pro Circuit recommend for jetting (I have a platinum pipe), but the bike seems to run rich in the low rpms and then up top it seems to have sudden surges once in a wile when I do a pull. I don’t want to ride the bike if it is going to damage the motor...
Hey guys, I just rebuilt the top and bottom end of my KX125 and need to re jet the bike. I repacked the exhaust, cleaned the pipe and my jetting specs are 45 pilot, 350 main, stock needle on 2nd pos, air screw 1.5 turns. The bike seems to bog down low and when I get it into the power band it...