Guys/Gals
I need your help with this one. I have a 01 CR250 that I can't get jetted right... I know I'm close, but I can't explain all that spooge.
I'm at 1100 FT MSL Temp 76 F. I'm running a 30 Slow jet, S-7 Needle jet, H2-75 Needle second clip, 430 Main and air screw at 1.75. It runs much better with the S-7 but I'm getting a lot of spooge still. The plug looks very close to the perfect one Eric has on this page http://www.eric-gorr.com/techarticles/sparkplugs.html but I have oil all the way up the threads and tons of spooge coming out the pipe. Any Ideas? How can I tell whether it is the low, mid or top that is causing the spooge?
Thanks,
Bailout