dandynick

Member
Apr 18, 2007
7
0
Hi gang! Gotta question for all you experts. I'm ready to put the drive sprocket on. I have a small O-ring, a seal, sprocket, large washer and bolt. What order do these go on? My service manual doesn't show this, but a microfiche site shows the O-ring, seal, sprocket and washer/bolt. Any info? Thanks!
 

dandynick

Member
Apr 18, 2007
7
0
So I slide the o-ring all the way along the shaft as far as it will go, then the seal with my trusty socket, then sprocket, washer and bolt?
 

dandynick

Member
Apr 18, 2007
7
0
Oh wait. In the box of old parts I found a bushing, and then figured out that the o-ring goes into a slot around the bushing and then through the centre of the seal which I put in place ahead of time. Then sprocket, washer and bolt. Thanks for the help. It got my clock ticking when I saw the word bushing!
 

Welcome to DRN

No trolls, no cliques, no spam & newb friendly. Do it.

Top Bottom