I found this on the Team Green site, it's the (apparently) Pro Circuit "recommendations" for the 05 KX250....
Stock Main - 160 PC - 165
Stock Needle position - 2 PC - same
Stock Pilot Jet - 50 PC - 52
Stock Air screw - 1 1/2 turns PC - same
Oil mix at 32: 1
Above suitable for seal level to 3000 feet.
Most new bikes seem to come too rich from stock, but PC are going with more fuel delivery in every jet.... do they know something I don;t??
Is there some racer secret we should all know? :whoa:
John
Stock Main - 160 PC - 165
Stock Needle position - 2 PC - same
Stock Pilot Jet - 50 PC - 52
Stock Air screw - 1 1/2 turns PC - same
Oil mix at 32: 1
Above suitable for seal level to 3000 feet.
Most new bikes seem to come too rich from stock, but PC are going with more fuel delivery in every jet.... do they know something I don;t??
Is there some racer secret we should all know? :whoa:
John