1993 CR125 Help

sk8er_719 · Mar 31, 2008

I searched but couldn't find anything regarding the problem i'm having. I'm in the process of pulling the motor and i get to the swingarm bolt. I cannot figure out how to get this little guy out.
I have pics but don't know how to upload them. Any help is appreciated.

Thanks
Mike.

minutz · Apr 1, 2008

Your talkin about the long bolt that goes through the frame and engine right? It should come out by taking the nut off and just drive it out with a brass punch or something softer then the bolt. Have seen these become one with the bearings due to rust, lots of penetrating oil might help.

sk8er_719 · Apr 2, 2008

minutz said:
Your talkin about the long bolt that goes through the frame and engine right? It should come out by taking the nut off and just drive it out with a brass punch or something softer then the bolt. Have seen these become one with the bearings due to rust, lots of penetrating oil might help.

Yes. Thank you, I'll try that.

1993 CR125 Help

sk8er_719

minutz

sk8er_719

Similar Topics

Privacy & Transparency

Privacy & Transparency