2001 KTM 400 MXC handguards

[Startin' late]

I bought Acerbis handguards but the Pro Taper adapter kit won't fit the Magura SX bar. Does anyone know of any adapters that will work or do I have to swap out bars to make this happen?

 

[biglou]

I'm not sure if they will work with the Acerbis, but Enduro Engineering sells bar mounts by themselves and they have seperate part numbers for four different types of O/S bars (Pro-Taper, Magura, Tag and Stock KTM). Lots of neat stuff on their site. Check'em out: Click.

 

[rickshaw]

Acerbis hand guards

I have the same hand guards on my 400. My advice is to call Enduro Engineering and use their mounts. In fact, I will most likely take the Aceribs off and buy the EE guards. I was very dissapointed with weak handle bar mounts - stripped threads...

Good luck!

 

[Startin' late]

Perfect. I will call them and order them up. Great products on the EE site...
Thanks.

 

[Startin' late]

I bought the Magura clamps at Enduro Engineering , part # 10-036, and they fit. Thanks for the advice.