If it has 4 holes in the top, you will need the motion pro tool or similar. If it doesnt it should be 24mm or 25 mm socket/wrench. Dont forget to loosen the pinch bolts on the triple clamps if you are doing this on the bike.
If you don't have the tool you can get 4 screws that fit in the 4 holes in the cap. Put one down in each hole, they don't screw in they just drop in. Then use a screwdriver to turn the cap off a quater turn at the time. Do remimber to loosen the top clamp pinch bolts. It is better to break loose the cap before you remove the fork from the bike.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.