Just got a bike that has been sitting for a LONG time... got it running pretty easy.
I think the bike is an '85... KX 125 .... early liquid cooled model, left side radiator only, front disc, rear drum brakes..
The bike runs pretty good but the clutch will not disengage the motor AT ALL.... The clutch has no play in it and the barrel adjuster on the lever is maxed out.... I drained the oil... it was thick and there was very little of it (no signs of metal shavings)... I put in some 5w-30 motor oil.. about 1/3 quart, still not disengaging...
any idea?... new clutch.... not enough oil? (there is no dipstick or sightglass so I have no idea how much should go in.)
I think the bike is an '85... KX 125 .... early liquid cooled model, left side radiator only, front disc, rear drum brakes..
The bike runs pretty good but the clutch will not disengage the motor AT ALL.... The clutch has no play in it and the barrel adjuster on the lever is maxed out.... I drained the oil... it was thick and there was very little of it (no signs of metal shavings)... I put in some 5w-30 motor oil.. about 1/3 quart, still not disengaging...
any idea?... new clutch.... not enough oil? (there is no dipstick or sightglass so I have no idea how much should go in.)