89 kdx 200 fork seal change - trouble / stuck


chrisp80

Member
Jun 5, 2008
10
0
I have the service manual for my 89 kdx 200 and I'm trying to change the fork seals and oil. I have the front forks off and I'm STUCK on what to do next.

I took the cap off, springs out and drained the oil. I'm stuck on if I have to remove the inner tube and bottom nut before I can seperate the tubes to get to the seals.

Do i have to remove the vavle assembly to change the seals only? I dont have the special tool to hold the inner tube.

What do I do? Thanks everyone. This is my first rebuild. Its going well so far. I'll post pics once the forks are done.

Chris :cool:
 

chrisp80

Member
Jun 5, 2008
10
0
I'll try it

Thanks so much for the heads up. I figured I had to.

I'll check out that site. This is my very first rebuild so I'm so excited to learn what I can.

Chris
 

Top Bottom