hi a little help please.
ive got a 92 rm 250 and it was working fine untill is started just cutting out for no reason!
i would kick it and nothing, tried to bump it then nothing then i took the plug out and tryed earthing it out on the engine to see if it was sparking and nothing,
i checked all the wires and every thing looked fine and i dissconnected the kill switch to see if that was the problem with no joy,
all the time kicking it to see if it was giving me a spark, still nothing a few kicks later and it just started sparking bit on the faint side though, i put the plug back in and away it went no problem it ran for about 1 min and then died again :yell: ,
i took the plug out and again no spark the plug was fine not that wet and recently changed so i just tried kicking it after about 7, 8 kicks it started sparking again so i put it back in and it fired straight up for a couple of mins and died again.
i did this a few times and got sick and put it away.
has this happend to anybody or could anybody tell me what to do to get it working properly thanks, Garry