94 kdx rear mx fender

[Eview326]

I have a 94 kdx with a broken rear fender, i want to replace it with an mx rear fender, black or green doesnt matter. I used the search already but all i found info on was 95-02 kdx's. i found one thread that said i could use a '99 to 2002 KX 125/250 rear fender, i just wanna make sure before i buy one. someone please let me know. thanks

 

[VaKDX200]

Try this link http://www.frpoffroad.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=FRP&Category_CodeDYPRTS

Fredette has exactly what you are looking for.

 

[procircuit21]

E view I have one from Fredette that will fit '89-'94 on ebay right now. I got it I just never put it on. here is the link:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2437294859

 

[bh]

The one from fredette is actually for a 88-03 Kx500 and it doesn't fit very well. His site says that after you drill two holes it is a perfect but it isn't. It takes a little cutting and bending to get it to work and even then it doesn't fit very well around the seat. It can be made to work but it isn't the best.

 

[procircuit21]

Thats weird, the one I have on my bike now (not the one for sale) fits fine all I had to do was drill the holes. Maybe I got lucky ????

 

[JasonWho]

---

 

[bh]

I don't know but mine sure was a bear to get right.

 

[Eview326]

do you guys know what year kx fender will fit a 94 kdx

 

[procircuit21]

ya its from fredette and its a UFO... thats weird

I have been wonderin that too (what year kx fender fits a KDX)

 

[JasonWho]

---

 

[NYkdxer]

I bought a UFO KX 500 rear fender from Dennis Kirk for my '89 KDX 200 and it fit almost perfect. Had to do a little trimming, maybe took me 5 min. to get it to fit. Looks tons better than the faded, flat-green Maier I had on it before. It cost $22 and fits 88-03 KX 500, and 88-89 KX 125 and 250's. Part #610020

 

[JasonWho]

---

 

[Eview326]

thanks for your help guys i got a rear fender for a 99-01 kx 125/250 and had to trim it to fit but it looks good, also i got a new front fender for a 90-93 i think kx 125 and it looks good too. btw there both black!

 

[procircuit21]

How much trimming did you have to do!!!!

 

[Eview326]

i had to cut off all the fins and stuff off the rear fender and just make it a little more narrow. i started off using a razor blade but that wasn't working so i used a sawzall for most of it

 

[250RDude]

Here's my 90 KDX with the UFO Rear MX Fender. I had to trim by the silencer & Reserve bottle with a die grinder. A whole whopping ten minutes. I couldn't be more pleased with the results. http://community.webshots.com/scripts/editPhotos.fcgi?action=viewall&albumID=95468957

 

[procircuit21]

EView:
Did you just have to squish it to get it narrower? Do you have any pics with it on there?>

 

[89kdx200rdr]

ufo part number 12-171-22 has to be cut quit a bit to fit but it will fit

 

[89kdx200rdr]

oh and if u have a bench grinder it does a good job of cutting the fender to the shape u need

 

[JasonWho]

---

 

[250RDude]

See if this link works, http://community.webshots.com/user/250rdude.

 

[JasonWho]

---

 

[bh]

That looks good mine wouldn't go far enough forward to get the 2 front bolts in. It needed to go forward another 1/2 inch. Maybe I just got a bad one?