Adding a Lighting Coil to a '02 YZ250

[fmfkx125372]

I have a deposit down on a new YZ and was thinking about adding a lighting coil. I ride Enduros and on my old bike, I just rigged the head light to make it work. This time I want to do it right. I know they have a WR, but I really liked how my old MX bike worked in the woods. So does anyone have any experience doing this? If so, how hard and expensive is it to do? Any help would be greatly appreciated!:cool:

 

[dirt bike dave]

If you want to do it right, the retail for the e-line 2 x 100 watt system is $439.

http://www.elineaccessories.com/Lighting Coils by E-LiNE Accessories.asp

It works great and also helps to smooth out low end power like a flywheel weight, but without the gyroscopic effect that makes heavy flywheel bikes harder to turn. Mine powers an 80 watt headlight, brake light, tail light and grip warmers.

 

[fmfkx125372]

80 watts? That is a lot for a bike. Cars are only 65 or so aren't they? I am not looking to blind the check crew or anything, I just want a simple light that works off of the motor. No more 9v battery rigs!!