KaTMandoo

Member
May 16, 2001
84
0
Im about to reinstall my water pump seal in my 300 MXC and i have a few questions.

1) Do i need to put some type of sealant around the seal before i install it?

2) I have never bought antifreeze before, so when i go to the autozone do i just get some regular ole generic antifreeze and some distilled water and mix it 50:50?? And what is this i hear about water wetter or someting? do i replace the water with that or what?


thx
KaTMandoo
 

Jaybird

Apprentice Goon
LIFETIME SPONSOR
Mar 16, 2001
6,452
0
Charlestown, IN
50/50 water anti-freeze is far less effective than pure water at exchanging heat. Pure water with a surfactant such as Water Wetter is even better. Thing is you won't have any freeze protection.
I suggest you use water and a surfactant as the directions say, and add a small percentage of anti-freeze to protect when it freezes. Some anti-freeze also has some anti-corrosion additives.
You won't need much Water Wetter, read the directions.

If you can find Engine Ice, it's mixed and ready to go.
 

Welcome to DRN

No trolls, no cliques, no spam & newb friendly. Do it.

Top Bottom