Any recommendations for 29mm Carb KDXs?

TriniG

Member
Feb 5, 2002
69
0
Most threads on this site discuss jetting for the American Domestic Market KDXs which come with 33mm and 35mm carbs for 220/200s. With jetting in the 155 main and 42 pilot range.

The Japan Domestic and I believe the Australian Domestic Markets have their KDXs carbed with 29mm. (Any other countries?)

Does anyone in these markets have some input about jetting out these carbs? My 220 came with a 123 main, 45 pilot (has Gnarly, Power Core 2 and Boyesen). Since I did over the top end it is running richer. My 200 has a 124 main, 45 pilot (stock except for boyesen reeds) and also runs a bit rich.

I emailed RB to see if he could supply and mod a 36mm carb for me. No reply. If I go that route, I also need to know if the intake manifold can handle the increased carb size or if I will need to buy an American Mkt manifold to fit the 36mm
 
Top Bottom