Please help, i need a new pipe.
What is the best pipe for CR250 -00 and why ?
I like the original low and mid but id like
a little more power at high rpm:s, or
just an over-all powerboost.
I was very happy with the FMF SST pipe and shorty silencer on my '00 CR250.
I tried the Pro Circuit pipe and silencer combo first and definitely like the FMF setup better. It felt more powerful everywhere, especially top end. I did have to rejet to get the best performance.
Thank you very much for the tip.
I also thougt FMF SST is best but i have no experience
on my own since i never changed the original pipe.
Many riders use ProCircuit but i was not sure it is the best pipe. What jetting did you use with the SST and shorty ?
Thanks !
I had the V-force reed cage and FMF SST combo. 1500 ft above sea level. I ran a 45 pilot, stock needle in the 2nd groove and a 175 main, I also ground the slide .5 mm. I used a 105 octane mixture of race gas and pump gas. This combo worked well for my area, it may vary in yours.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.