Split the cases your self, I have done it several times it's not that hard, get a clymer manual if you need one, take the crank out and to a machine shop and have them press it apart put your new rod bearings on give it back to them and tell them to press it back together, some automotive shops have a machine press, that's abou $80 bucks for them pressing it, get your new case gaskets and putting in your main seal & bearings back in are a snape, most all the gears are easy to keep together, bike bandit has exploded views of diff trannys, and you will see what goes where, but you won't even need that. I learned how on an old engine cause I was scared to do it to mine, but after I did it just once I was no longer afraid and have done it many times since. don't be afraid.