D datsun Member Jan 16, 2004 16 0 Jan 22, 2004 #1 WHERE SHOULD THE IDLE SCREW BE WHEN ADJUSTING THE AIR SCREW? NOT GETTING MUCH CHANGE WHEN TURNING AIR SCREW, STILL GERGGLLES/HESETATES
WHERE SHOULD THE IDLE SCREW BE WHEN ADJUSTING THE AIR SCREW? NOT GETTING MUCH CHANGE WHEN TURNING AIR SCREW, STILL GERGGLLES/HESETATES
C cicone Member Sep 29, 2003 310 0 Jan 22, 2004 #2 Fully warm up the bike and set the idle as low is you can and still run. Then turn the airscrew all the way in and start backing out very slowly. You'll be able to tell when it speeds up.
Fully warm up the bike and set the idle as low is you can and still run. Then turn the airscrew all the way in and start backing out very slowly. You'll be able to tell when it speeds up.
D datsun Member Jan 16, 2004 16 0 Jan 22, 2004 Thread starter #3 BIKE HAS NEVER JUST IDLED SINCE NEW 01