fremontguy

LIFETIME SPONSOR
Jul 1, 2000
580
0
Since we're on needle topic ,is the difference between N85D and N85E 1 clip position or1/2?
 

James Dean

Member
May 17, 2000
137
0
CEJ is richer on the straight portion by .01mm. This will only have an affect below 1/4 throttle.

CEJ is 2.68mm vs CEK at 2.69mm

-------------
The N85 question can't be equated to clip position because it is the portion before the taper start which is different. Again, only having an affect below 1/4 throttle.

N85D is 2.68mm vs N85E at 2.69mm

These both run richer than the CEJ/CEK because of the location of the first taper start (higher on the needle).

James
 

fremontguy

LIFETIME SPONSOR
Jul 1, 2000
580
0
Thanks for the reply on the n85 JD. I should probably leave clip in 1st position after change to n85e, instead of lowering to 2nd position I guess.
 
Top Bottom