I just changed my gear oil for the first time and I have a questions about checking the oil level. This is for an '03 KX100.
After I drained and filled the tranny to the proper level, I warmed up the bike for a couple of minutes, shut it off and checked the level again and it was high. Is the proper reading taken when the bike is still warm or should I wait a few minutes to cool down? I filled it according to the manual (650ml) but it seems that it might be too much, if I go by the reading when the bike is warm.
Thanks for any tips!!
Kristina
After I drained and filled the tranny to the proper level, I warmed up the bike for a couple of minutes, shut it off and checked the level again and it was high. Is the proper reading taken when the bike is still warm or should I wait a few minutes to cool down? I filled it according to the manual (650ml) but it seems that it might be too much, if I go by the reading when the bike is warm.
Thanks for any tips!!
Kristina