Hi Guys I was just starting to clean my engine after a days riding and this little circlip fell off from inside a black boot pic to show. If anyone knows where this goes please help thanks!!
Well I got it done! I was off a part inside the grey box it held a round thing that connected to a bar letting it rotate. This thing might have been off for a few days. Do you know exactly what the shaft does?
Thanks for the help!
Im sure theres a way to check if your power valves are working. With the 95s and up you can remove a little cap and rev it and inspect whether its working. Someone will hopefully chime in with an answer.
Im sure theres a way to check if your power valves are working. With the 95s and up you can remove a little cap and rev it and inspect whether its working. Someone will hopefully chime in with an answer.
Sweet... Does yours close slowly as the revs die down or does it snap closed? Mine slowly closes and Im just checking to see if all is well and if its meant to close slowly with the revs.
Mine slowly starts closing with the lowering of the revs :cool:
Now I gotta figure out this bikes wiring to put the headlight on wirings a mess was all elec taped :p