dirtbike2244
Member
- Mar 22, 2007
- 44
- 1
ive got a kx125 and it doesnt idle in gear and the clutch doesnt always hold in low rpms,(if i want to stop i have to give the engine some good revs) is this the same for everyone or is there a problem?
NM_KDX200 said:None of my 2 strokes have idled very well, if at all. In fact, that was one of the first things I noticed when I started my 450F for the first time- it idled!!!
What your 2-stroke is trying to tell you is "Rev me, or I'll die!" :)
Turn the idle up so that it idles faster.dirtbike2244 said:is there any way that the bike can be set to not die if the clutch is pulled and is idling?
dirtbike2244 said:is there any way that the bike can be set to not die if the clutch is pulled and is idling? Im trying to use this as a hill climber and trails but if you get stopped it gets tricky.
dirtbike2244 said:is there any way that the bike can be set to not die if the clutch is pulled and is idling? Im trying to use this as a hill climber and trails but if you get stopped it gets tricky.
what kind of oil you putting in the case? I have had issues with some and now use ATF type F and my RM250 will idle fine in gear at any given time when clutch pulled in.