cr 125 engine interchangeability

K

kymx

Member

Oct 22, 2002

79

0

• Jan 19, 2003

• #1

will an engine from a 1995 cr125 just happen to fit in a 2000 cr 125 frame?

 

marcusgunby

LIFETIME SPONSOR

Jan 9, 2000

6,450

2

• Jan 20, 2003

• #2

I think the engine fits but the pipes dont.

 

A

atc3434`

~SPONSOR~

Nov 1, 2001

579

0

• Jan 20, 2003

• #3

Sounds like time for a custom job.... fire up the welder and torches. :p

 

K

kymx

Member

Oct 22, 2002

79

0

• Jan 20, 2003

• Thread starter
• #4

what about the swing arm? will it fit on the 95 engine or can you use the 95 swing arm?

 

marcusgunby

LIFETIME SPONSOR

Jan 9, 2000

6,450

2

• Jan 20, 2003

• #5

Im failry sure the bottom end hasnt really changed over the last decade.At least externally.

 

K

kymx

Member

Oct 22, 2002

79

0

• Jan 20, 2003

• Thread starter
• #6

thats what i was thinking. i hope i can find a rolling chassis now!!!
what about the 95 suspension and the 2000 frame

 

marcusgunby

LIFETIME SPONSOR

Jan 9, 2000

6,450

2

• Jan 20, 2003

• #7

Not really sure what you are trying to acheive?the linkage is different and so is the shock i think.The 2000 suspension can be made better than the 95.

 

K

kymx

Member

Oct 22, 2002

79

0

• Jan 20, 2003

• Thread starter
• #8

o ok. i have a 1995 cr but i would like to have an aluminum framed cr but im to poor.

 

marcusgunby

LIFETIME SPONSOR

Jan 9, 2000

6,450

2

• Jan 21, 2003

• #9

Not trying to be unhelpful but it probably will cost more to do that way.

 

A

atc3434`

~SPONSOR~

Nov 1, 2001

579

0

• Jan 21, 2003

• #10

See if you can find a person that races shifter carts that wants a 125 motor... then go out and split the cost a 2000 or so... you get the frame, he gets the motor. Just a thought....

 

K

kymx

Member

Oct 22, 2002

79

0

• Jan 21, 2003

• Thread starter
• #11

it probably would be more expensive to build one
besides i cant weld!