TEAMWFO

Member
May 23, 2000
27
0
I have a 00 CR250 and weigh 190 and ride mx.The bike is way to soft.I've tried turning the clickers all the way in and used moble 1 atf at max oil level and still to soft.I was thinking about trying 45 fork springs and 5.1 shock spring.Anybody try this setup?

------------------
 

CR Cotton

Member
Oct 8, 2000
10
0
Hey WFO Ijust put the 5.1 spring on my 2000 250 and it works great, but I have yet to get the fork springs. You better believe I need them too I weigh about 220 with gear. Hey , that spring might have been a 5.2, but at any rate it was a very big difference.

------------------
 

JTT

~SPONSOR~
Aug 25, 2000
1,407
0
WFO, I too have an '00CR250 (MX) and weight about 190. I changed my shock spring to a 4.95 and forks to 45. The shock feels great, the forks still require some work, but I think it's more of a valving issue at this stage.

------------------
JTT
No matter where you go...there you are
 

mxneagle

Member
Jan 7, 2001
320
0
I weigh 187lbs and I'm running stock fork springs and a 5.2 shock spring. However, I've not running stock valving with this. So far its working pretty good but I might consider going to the 5.1 shock spring.

------------------
 
Top Bottom