Home
Basic Dirt Bike How-To's - Video
Dirt Bike How-To's - Video
Living The Moto Life - Video
Bike Tests | Shoot-Outs - Video
Forums
What's new
Latest activity
Log-In
Join
What's new
Menu
Log-In
Join
Navigation
Install the app
Install
More options
Close Menu
Forums
Dirt Bike Discussions By Brand
Honda MX & Off-Road Dirt Bikes
CR250 with a strange behavior
Reply to thread
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Message
[QUOTE="Dvraptor, post: 148717, member: 16024"] My –97 CR250 has this strange thing going on when the engine is warmed up. Sometimes when I let of the gas the RPM still hanging on a little bit above idlee, it’s enough to resulting in a gyro effect that rise the front when i’m in the air. It doesn’t always happens when I shut the throttle, but often enough to be realy enoying... Other than that the engine runs great, doesn’t bog or hesitate and pulling strong all the way. Things I have done to try to fix this: -cleaning the carb, twice... -checked if the carburator vent hoses where clogged. -spraying contact cleaner at the carburator, reed valve, crankcase and cylinder with the engine running to find any air leaks. ( but not under the magneto cover) -checked the throttle grip and wire. -cleaned out the exhaust port. -decarbonazed the pipe and silencer. -clenead the airfilter -diffrent air-screw settings. I haven’t checked the sparkplug yet... or try to set the idle adjustment to zero, I heard that on the Kehin PJ carb it’s better to just ignore any idlee... The engine also has a new piston and rings and the former owner changed som bearings in the engine ( at a shop) so i guess most of the seals are new. The only thing I have noticed is that there a two tiny little cracks att the beginning of the pipe, it doesn’t smoke but leaves some black oil marks, and I havent checked the conditions of the o-ring attached on the end of the pipe where its connected to the engine. Could this be the problem (hard to belive that) One more thing. The jetting seems to be a little rich – main 190, pilot 62 (original 175 and 55) maybe there’s been an aftermarket pipe on it. But as I wrote earlier - it’s running pretty nice, and I mostly ride on a very soft and difficult sandtrack. So whats the verdict, do I have to split the engine and check the crankcase seal? What is the best way to see if this seal is broken? Thanks in advance [/QUOTE]
Verification
Which ocean is California closest to?
Post reply
Forums
Dirt Bike Discussions By Brand
Honda MX & Off-Road Dirt Bikes
CR250 with a strange behavior
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
Accept
Learn more…
Top
Bottom