I just got a hoopty 1996 CR80RB....the previous owner didn't have the owners manual.
Does anyone know the torque specs for the head, cylinder, and suspension linkage, fork clamps, and swingarm .
Any assistance , will certainly be appreciated.
Luckily the bike so far ....doesn't need the cases split....but everything else needs attention.
Blown fork seals....decomposed air filter.....stripped screws on front brake reservoir......missing front brake pads.......bad rear wheel bearings....stretched chain and bent sprockets.....bald ' 96 tires....that's it for now.
Good things......cylinder 'looks ' good, reeds are fine, seat is still stock and only has some mold on it . Shifter and rear brake pedals are not bent, frame and subframe not bent, carb is intact, both pipes are not bent ...but are rusty.
see ya
donnie
Does anyone know the torque specs for the head, cylinder, and suspension linkage, fork clamps, and swingarm .
Any assistance , will certainly be appreciated.
Luckily the bike so far ....doesn't need the cases split....but everything else needs attention.
Blown fork seals....decomposed air filter.....stripped screws on front brake reservoir......missing front brake pads.......bad rear wheel bearings....stretched chain and bent sprockets.....bald ' 96 tires....that's it for now.
Good things......cylinder 'looks ' good, reeds are fine, seat is still stock and only has some mold on it . Shifter and rear brake pedals are not bent, frame and subframe not bent, carb is intact, both pipes are not bent ...but are rusty.
see ya
donnie