Crankcase tools

[jimyzttrxr]

Can anyone tell me were I can purchase a crankcase splitter, crankcase installation tool and a flywheel puller for a yamaha yz-125 the puller is for the inner magneto rotor. By the way this is a old bike 1985 I do not know if this makes a diiference or not.
Thanks for any info.
Jim

 

[darringer]

You might be able to get the flywheel puller at Rocky Mountain or Dennis Kirk. You really don't need any crankcase pullers or assembly tools. It isn't that hard to split the cases. After removing all the case bolts I tap lightly on one end of the crank to separate the halves. The cases should go back together relatively easy without any hammering or the need to pull the cases together with bolts.