yortz

Member
May 16, 2004
35
0
My buddy has a 01 200 exc,and it had just been rebuilt before he bought it. He has a couple of questions so i told him I would ask the wizards at this site,so here goes; There is a stamping on the cylinder casting [ bottom part] that says 60 stroke; does that mean it is a oversize replacment cylinder, or just a stock replacement? And also we ride all tight woods first, and second gear stuff, and he has re jetted per the manual for our elevation. And the bike has a lot of spooge running down the front of the cylinder and on the pipe,the bike foules plugs almost ever ride. However ther does not seem to be a flat spot in the power band [ Bike seems to run fine]. Could this be his oil mixture ? he is running honda 2 stroke, [dont know why,] at about 40 to 1 ratio. Any help would be appriciated. thanks
 


Top Bottom