Easy way to change jetting in XR200?

xTYBALTx

Member
Mar 10, 2004
118
0
I need to change the jets in my XR200 so that it'll work with a Big Gun Exhaust (don't ask me - I didn't buy it!). Of course, I don't want to tear the carb off the bike and pull everything around it off either. Is there an easier way to change the jetting on this baby?

I have heard that with some bikes, you can just unscrew something and have access to the jets, but no one's said anything about these XR200's. Any help would be greatly appreciated!

On a side note, if anyone has any guesses for what jetting I would need for my bike that would be awesome. I'm running at 6000-9000 feet, 40-100 degrees farenheit, snorkel removed, Big Gun Exhaust, Uni air filter. No idea what the current jetting is, but it works perfectly without the Big Gun and bogs down low with the Big Gun on.
 

hlinar

Member
Oct 21, 2002
68
0
You should be able to loosen the clamps between airbox and carb and carb/intake. Rotate to the left and remove the bowl. Call Big gun and ask their recommendations re: jetting.
 
Top Bottom