engine painting?

[gvw]

I'm wanting to repaint my '73 CR250 engine cases along with the top end and was wondering if anyone has suggestions on the paint. I've seen paint offered from PJ1 and other makers and wondering if this would work to match the original style.


Thanks

 

[CRazy250]

i used black engine paint for the engine, and i used flat black bbq paint for the exhaust and scotch brighted the exhaust to make it have a more flat effect

 

[gvw]

CRazy250, thats interesting- might have to give that a try :cool:

 

[Shadowpillar]

hrmm, good idea. I was trying to think of which paints would work on say, exhaust pipes.

 

[ghost665]

I've found that the high temp barbaque paint from Home depot, or lowes works great on pipes and engines. Just let it dry for a couple of days brfore you start the bike.

 

[Shadowpillar]

I've found that the high temp barbaque paint from Home depot, or lowes works great on pipes and engines. Just let it dry for a couple of days brfore you start the bike.

but the noxious fumes are the best part!


:P

 

[jason33]

you need a nother cr250 motor? it has the mt cyl with it top end is off,still has the stater/rotor -bottom is complete the kickstarter slipped a little - i have had it sittin in the garage for 15years -mabe someone could use it - tranny parts ect...

 

[cr250mMxer]

how much do youwant for it i know someone who needs it