I have a suzuki ts-400 single cylinder motor.. the engine sprocket has 15 teeth and I want to drop it... what will interchange with it?? it has 13 splines on the shaft!! thanks
so you are saying that I need to keep a 525 chain?? that is not common and I need to get into something common because I am thinking I am going 2 have to have a custom sprocket made... could i go 520??
Did you look at the link I posted? They sell all the different sprockets for that bike...no need to look any further , much less consider having one made.
yes, I looked at it.. at the smallest they make is a 12 tooth.. would REALLY like to find an 11 tooth and that would put me in the ballpark.. do you know if there are any #525 chain 11 tooth sprockets that will fit on a ts 400??
yes, I looked at it.. at the smallest they make is a 12 tooth.. would REALLY like to find an 11 tooth and that would put me in the ballpark.. do you know if there are any #525 chain 11 tooth sprockets that will fit on a ts 400??
Why in the world would you want to drop down to a 11 tooth front sprocket?
Have you ever experimented to see how much of a difference dropping a tooth or two on the front makes? With a 12 tooth front, you'll never use 1st or 2nd gear and will probably have a top speed between 40 and 50.