What's up Dirt Rider! (First post - who-hoo!)
Just stopping by to share our most current bike build, that one of you will take home with you soon.
We started with a 2023 Gas Gas MC250 that had about 15 hours on it, and are converting it into an MC500 complete with electric start (which the MC250 did not have)
As we're using a brand new BRC Racing 500 two stroke engine, it'll also be exhaust valve (power valve) equipped & include a balance shaft to kill big bore two stroke vibrations.
You can check out the complete YouTube build series on the mXrevival YouTube channel if you'd like. We're on episode 8 as of today and love giving away MX parts in every YouTube episode.
So far we've covered framing the bike, Cerakote / powdercoat process & how-to, split cases on the MC250 engine (MC500 uses stock 250 trans) as well as a sneak peek on the body, vapor blasted bits, handmade cone pipe, decals & wheels...
...might even be a set of Technical Touch KYB cartridges hitting your build soon
Lots of fun!
This week we're giving away 3D printed moto parts from 3DP Moto & showing off new parts that just came out for the KTM / Gas Gas / Husqy. crew.
Much more to give away such as Lectron carbs, Phoenix Handlebars, Slacker Sag Scales, DeCal Works graphics kits & TONS more upcoming.
Additional info on how to win "HELFYRE" on our website - mXrevival if you dig what we're doing. (sorry I'm not allowed to add links yet! - New guy problems!)
Appreciate ya!
-Charles // mXrevival
Just stopping by to share our most current bike build, that one of you will take home with you soon.
We started with a 2023 Gas Gas MC250 that had about 15 hours on it, and are converting it into an MC500 complete with electric start (which the MC250 did not have)
As we're using a brand new BRC Racing 500 two stroke engine, it'll also be exhaust valve (power valve) equipped & include a balance shaft to kill big bore two stroke vibrations.
You can check out the complete YouTube build series on the mXrevival YouTube channel if you'd like. We're on episode 8 as of today and love giving away MX parts in every YouTube episode.
So far we've covered framing the bike, Cerakote / powdercoat process & how-to, split cases on the MC250 engine (MC500 uses stock 250 trans) as well as a sneak peek on the body, vapor blasted bits, handmade cone pipe, decals & wheels...
...might even be a set of Technical Touch KYB cartridges hitting your build soon
Lots of fun!
This week we're giving away 3D printed moto parts from 3DP Moto & showing off new parts that just came out for the KTM / Gas Gas / Husqy. crew.
Much more to give away such as Lectron carbs, Phoenix Handlebars, Slacker Sag Scales, DeCal Works graphics kits & TONS more upcoming.
Additional info on how to win "HELFYRE" on our website - mXrevival if you dig what we're doing. (sorry I'm not allowed to add links yet! - New guy problems!)
Appreciate ya!
-Charles // mXrevival