Forgot Clutch Lifter Lever

[chem_dawg]

So I'm rebuilding a CRF150R engine and my dumbass left off the clutch lifter lever when installing the clutch and put the engine back in the frame already too. Soooooooo

question is, what do I need to remove to reset the Clutch Lifter Lever (the part that connects the wire to the clutch) . And can it be done with the engine in the bike ?

 

[Ol'89r]

Remove the right side clutch cover and remove the clutch pressure plate screws/springs and the pressure plate. Pull the clutch push rod out and install the clutch lever on the other side. Reassemble. Can be done in the frame.