Fork Oil Change, Piston rod

Joined
Sep 17, 2000
Messages
38
Likes
0
#1
Ok, my forks are off and draining. Wasn't as bad a job as I thought is was gonna be. The one piston pumps up and down with increasingly less restriction until all oil drains and there's no more restriction -- it freely falls down with the forks upside down draining. Great, right? But, the other piston isn't getting less restrictive. After about 20 pumps it still sticks inside the fork tube and I have to physically reach down each time to retrieve it. This doesn't seem right. Can anyone lend some experienced advice??