Front fork boots?

css_elfers

Member
Aug 26, 2004
166
0
To switch out the front fork boots can I just loosen up the bolts that hold on the fork tube on one side and leave the front wheel attached or do I need to take the whole tube off and slip on the new boots?

Later
ELF
 

Matt90GT

Member
May 3, 2002
1,517
1
you have to remove both tubes from the triple trees.

Easiest way is to remove the front wheel and do them one at a time.
 

KDXMAC

Member
Sep 13, 2004
79
0
boots

I reciently changed the boots on my 98 Kdx200, I took both legs out with front wheel still on, saved heaps of time, mind you you have to jack the bike up a fair height to get the legs out with the wheel on. Dont forget to inspect the fork seals and clean out any dirt/dust from around the seals ;) .

Happy Trails :ride:
MAC
 

ridered125

Member
Feb 7, 2003
10
0
Where did you get your fork boots? Can you get them in green, rather than the black found on the later models?
 

css_elfers

Member
Aug 26, 2004
166
0
We got the purple ones from Chaparral or Dennis Kirk.
They are on and all is good. Again thanks for all the input.

ELF
 

Mrobbins

~SPONSOR~
Sep 28, 2002
172
0
Second vote for the Seal Savers. Used them last year after having the forks redone. The fabric held up with only one small tear and the top of the seals stayed clean all the time.
 

kmccune

2-Strokes forever
LIFETIME SPONSOR
Jul 3, 1999
2,726
1
Okiewan said:
One thing is for sure... the front fork boots are a lot easier to replace than the rear fork boots ;)

Yup, those Harley dirt bikes were way cool!!!!!!
:coocoo:
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…