hehehehe...steve, i will drag you down to my level eventually, poor old marcus still needs councelling after trying to suss out my fork valving!
even when the bike ran like a top, it still had some spooge. i conceed, i am ready for a new top end also (not too far gone) so i am sure that will help. other than that, nothing! i just wonder if i have just gotten used to the bike, so it is my familiarity with the power rather than it not running so good?
the stock settings are 50 p 2nd clip and 178m. one of our local guys was running this on the same bike with the same pipe and it was clean as a whistle, however, he was running 50: 50 pump/race gas. I am on 48p 2 clip and 175 main and ive got the spooge, tried differnt oils and ratio but to no avail. all of the other ("local")sources of jetting MXA, FMF are all running 50 p and 2nd clip, MXA suggest 178main and FMF 172 main. I doubt the main is my problem, but i will try it to make sure, especially since i dont have it flat out very often. ive found no instances of the leaner clip setting from anyone!
i have bought the v-force anyway, and will do the piston within the next few rides, i will play around some more and if that doesnt work i will look into the race gas, if only for consistancy and peace of mind when taking it leaner.
thanks