You don't need to remove the grips if you're installing new bars. The grips may be difficult to slide on dry. Use an adhesive, I use 3m Weather Strip Adhesive there are a million other things that work and I'm sure everybody is going to list them, and the slip right on with almost no effort. The weater strip adhesive will dry within a couple of minutes. Don't use grease in the throttle tube, it's too tacky. A light oil works just fine. I personally use Tri-Flo with Teflon, again just about anything will work.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.