nexus72

Member
Jul 6, 2007
2
0
I have a 96 Rm250 that will not crank without starting fluid.Once it turns over as long as the engine is warm it will start back up within 3 kicks but when it cools down it will not start without starting fluid.Any ideas?
 

dirt bike dave

Sponsoring Member
May 3, 2000
5,349
3
Two very common causes of poor cold starting are:

1) The reeds are warped/cracked/chipped. Inspect and replace if necessary.
2) No compression due to a worn out top end. If compression is too low, you probably need rings and a piston.
 


Top Bottom