I Recently bought my Cr250 ( 1999, 2 stroke) and it was great until the engine ceased, Well, I think that is what has happened,
The Cylinder and piston is fine, but it seems to be the bottom end that is ceased. The kick wont turn over and the crank is hard to turn by hand.
I have it stripped down to the Bottom end and i noticed some metal filings :yikes:.
Any idea what this could be? i have to wait to next weekend to strip the rest cause i work too much,
Ooh, and there was plenty oil in the bike too.
Any help is much appreciated ppl, thanks :)