HELP with oil seal

[hdrat]

Hey everyone, great site. On my son's 05 Yamaha TT-R125E, the clutch cable that connects to the push lever, the oil seal needs to be replaced. How does that PUSH LEVER come out so I can replace the seal. We are going riding in the AM and I want to fix it right away, any help would be great. Thanx Rich

 

[hdrat]

Anybody!!! Somebody has taken one of these apart before :cool:

 

[marcusgunby]

normally you have to remove the bolts that hold the plates in the clutch basket(4 or 5 normally), this then allows the push rod to move enough, to get the lever out.Turn the lever through 180 degrees before lifting it, to ensure its pushed the rod out of the way.

 

[hdrat]

Thanks marcusgunby. The manuel that comes with this bike is very vague so I will give it a shot.